I chose Public and Private network types. If you ever need to do it at all, it is to ensure that interfaces are registred properly, and so you only do this ONE TIME by right clicking and run as admin. Enriching your astronomy experience since Register My Serial Numbers. It has been reported that this driver also works with the RCX except it doesn’t allow access to its unique features. Many report success using it. You listed your firmware revision levels.

Uploader: Gakus
Date Added: 27 September 2017
File Size: 45.69 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 8449
Price: Free* [*Free Regsitration Required]

Equatorial mounts do not need to be accurately polar-aligned although an accurate polar alignment will likely lead to a more satisfying observing experience. I chose Public and Private network types. ACP and Gemini 4.

Connecting TheSkyX to ASCOM Driver

I am not trying to connect with Gemini 2 wirelessly. Before I upgraded my laptop from Win 7 to Win 10, I remember being able to connect to Doc’s site indicates that 1.

But again I don’t think the modeling is the solution, something more basic is going on in your case. Vixen SkySensor 6. Have you confirmed that these are the actual IP address and port being used by your mount? This didn’t seem necessarily wrong so I hit OK in this window too.


Connecting Laptop to Gemini 2

Thinking that I wscom need to recycle the power on the laptop to activate the newly installed drivers, I did so. I used two separate connection configurations. May 2, The Ascom site indicates that the Gemini driver needs “the current firmware” to work.

Ascom 2X Mount Adaptor Paramount, etc. Use this driver with mounts that purport to use the LX protocol. Cannot connect to Gemini.

And so I experiment. This version corrects the installer so it can be installed on Platform 5 and 6 and later.

Connecting Laptop to Gemini 2. I ran some further tests based on Brian’s suggestions. If you ever need to do it at all, it is to ensure that interfaces are registred properly, and so you only do this ONE TIME by right clicking and run as admin. Is it possible that something in Win 10 is interfering? NET supposed to provide a virtual WiFi router with this address to act as an intermediary to Gemini at Gemini Firmware required for Ascom driver?


Provides position readout, slews, side of pier where appropriateand pulse guiding among its basic capabilities. The second was to use an Ethernet switch with two standard Ethernet Cat 5 cables. Settings for new Gemini Driver 1.

I then did the above again with similar non-results. I tried using the GUI to do the same thing and got the same results. Sign in Gemini.neet Help. I also see that your DNS Server entry is odd. It also recognises the StarSense HC.

You are welcome to visit and look around here, azcom you will not see the premium support sections until you are a DC-3 Dreams customer. Thread Tools Show Printable Version.

As for the process running already, I had looked in the TaskManager’s Services tab but gemini was not listed. I selected Ethernet The popup window shows: