FO DC550 DRIVER
Basic function Voltage added to the screen grid can be selected, high and low. Used to set which is indicated first, day or day of week, when date format is in the sequence of day, month, and year. Since, however, the scanner is disabled, initializing is not made. Refer to the block diagram, fig 1. If the following screen appears during installation of Sharpdesk, click the “Skip” button or the “Continue” button as appropriate to continue the Sharpdesk installation. During operation, the set magnification ratio is displayed. An interruption command is made during transmission or reception.
|Date Added:||26 November 2009|
|File Size:||11.46 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Printing Max Printing Resolution.
The reflected light from the document is reflected 5 times by No. When set to 0, under the following error status, auto receive is not made in auto receive mode.
At the same time, the manual paper feed stopper opens and the manual take-up roller is pressed to the fl of the paper to start paper feeding.
This is inputted to the CPU to display the trouble code H2.
Sharp FO-DC550 Fax Machine User Manual
When the operation is left for 1 min or more, the display returns to the main menu. When set to 0, send in memory mode ON is made in memory send.
Colors easy to be copied and colors difficult to be copied can be switched. Power OFF during transmission or reception Memory over during reception The length of transmission d550 of one page exceeds the range during transmission. RSPF 2 Remove the upper cover. Set- ting is reflected only when ON with test command Toner is attracted over the shadowed area because of the developing bias. As a result, Q is turned on rapidly. The scan head locking switch is locked Detail The white area and the black marking on the shading plate are used to obtain the difference in the CCD level values for judgment of lock.
Maintaining updated Sharp FO-DC software prevents crashes and maximizes hardware and system performance.
Valid only in dial test of simulation. LCD control circuit b. Replace the copy lamp unit. Press to select the sort function, 2 IN 1 copy function, or margin shift function. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down on the pressure plate of the paper tray. Intermediate tray 1 2 Remove the intermediate tray. Do not disconnect or connect the connector and the harness during the machine is powered.
Adjustment procedure 2 Execute test command to turn on the SCAN mode lamp on the operation panel and make the printing mode in the D-D mode.
Solvusoft: Microsoft Gold Certified Company
Disassembly procedure 1 Remove the rear cabinet. One beep Base setting beep: When the adjustment is made by the main cassette paper feed, the adjustment values of all the paper feed ports become the same. The ASIC performs image process with the digital data. Receive is started when CNG signal is detected in standby with external telephone used.
When shipping the unit, the scan head locking switch must be locked to prevent shipping damage. Setting up button manager Button Manager is a software program that works with the scanner driver to enable scanning from the machine.
Sharp FO-DC Laser Toner Cartridge and Printer Supplies at
In this case, reinstall the software from the beginning after solving the problem. Check the adjustment level shown in the above table of the exposure test chart Sharp Gray Scale. Set the number of recall attempts that are made when the line is busy. Set the ring pattern for distinctive ring. Default 50 50 Document transport direction Print lead edge Lead edge void vc550 Print start position Document transport direction Scan lead edge Scan end position Default: